R&S TSMA6 Getting Started page 34

®
R&S TSMA6
● The appropriate scanner license must be installed on the QualiPoc
device. If you do not have the correct license, contact the R&S service.
● On the R&S TSMA6, Bluetooth
ure 6-6).
To use the R&S TSMA6 with QualiPoc
1. Turn on the R&S TSMA6 scanner.
2. In the web-GUI, set the "Mode of Operation" to "QualiPoc" and press "Sub-
mit".
3. On the handheld device, start the QualiPoc
4. Touch the main menu , and then touch "Device manager"
5. Touch the plus sign (+) at the top of the screen and touch "NCM".
Figure 6-1: Add NCM
®
QualiPoc displays "NCM" under "Devices".
Note: The NCM provides the Bluetooth
6. Touch "Scan" at the top of the screen and wait until the scanning process
stops.
Getting Started 4900.8040.02 ─ 07
Configuring the R&S TSMA6
®
must be activated and visible (see
®
, the following steps must be performed.
®
application.
®
connection to the scanner.
Measurement Modes
®
handheld
Fig-
34