Beginning Programming; Programming Enhanced Functions - Unify OpenScape CP700 User Manual

138
Unallocated
Normal
K
Unallocated
Shifted
K
Do not disturb
¥
Label
K
¾
Q
Q
OK
Q
Unallocated
Normal
K
Repertory dial
¥
Label
K

Beginning programming

Open using the Softkey.
_
or
Open using the Softkey (not in Favourites).
_
€
Choose the function to be programmed on the key.
Confirm with the Softkey to set the function, for example Do not disturb.
_
If you do not want to accept the standard labeling:
Open using the Softkey.
_
The input field is displayed.
_
j
Enter the key label you want and confirm with the Softkey.
Save the programming with the Softkey.
_

Programming enhanced functions

The functions are programmed on the permanently displayed programmable
keys in the left panel or on a connected OpenScape Key Module 600. You can
also program the functions on the six function keys in the Favourites menu.
Repertory dialing
Hold down the Function key on the OpenScape Key Module 600 to which the
_
function is to be assigned until the programming prompt is displayed.
If the prompt is not displayed or a function is not executed, you can only
launch key programming via the user menu (consult your administrator
about the current setting).
Confirm the programming with the Softkey.
_
You can also initiate programming from the user menu
Open using the Softkey.
_
€
Choose the function to be programmed on the key.
Confirm with the Softkey to set the function.
_
If you do not want to accept the standard labeling:
Open using the Softkey.
_
Programmable keys
page 137.
