User Information - SPECTRO SPECTROCUBE C XEP06C Original Operating Instructions

2.2

User information

Compliance with all safety instructions is mandatory. For your own safety.

Only an expert organization or accordingly trained personnel are permitted to

transport the instrument in its transport packaging.
Only service personnel authorized by the manufacturer are permitted to

unpack, install, set up and connect the instrument.
Only carry out operator maintenance work that is described in Chapter 6 of

the operating manual. The operating personnel are not permitted to perform
any other maintenance work. Any further maintenance work (e.g. technical
maintenance) or repairs must only be performed by service personnel
authorized by the manufacturer.
Compliance with all safety instructions and accident prevention regulations is

mandatory during operation and while performing maintenance tasks.
Check the protective measures after every technical maintenance or repair

activity. The checking procedure is carried out in accordance with DGUV V3
(German Social Accident Insurance) or an equivalent national regulation.
Compliance with the maintenance schedule specified by the manufacturer

and the recording of all maintenance activities is mandatory. This helps
maintain the operational safety of the instrument.
Never tamper with the safety devices! If you suspect that a safety device does

not work properly, shut down the instrument immediately! Please contact your
Service Center.
Compliance with the information labels provided on the instrument is

mandatory.
Only genuine spare parts must be used when repairing the instrument. The

use of non-genuine spare parts will render the CE Declaration of Conformity
null and void.
Operate the instrument only using system networks with protective ground

(PE) conductors.
Operate the instrument only in a dry environment (protection class IP 30,

DIN 40050).
If the instrument is located on an incline and equipped with castors, it can roll

away during operation. Secure the instrument for operation. This also applies
when the instrument is located on a cart.
Compliance with the relevant safety regulations for the use of auxiliary aids

and operating equipment is mandatory.
Disconnect the power plug before opening the instrument.

SPECTROCUBE C — 28.08.2019
Safety
— 11