User Information - SPECTRO SPECTROTEST Original Operating Instructions

2.2

User information


Compliance with all safety instructions is mandatory. It's for your own safety.

Non-compliance with the operating and safety instructions may lead to injuries
and can cause a health hazard.

The instrument - in its transport packaging - may only be transported by
expert organizations or by specifically trained personnel.

In order to move the instrument around, use either the recesses grip or place
the instrument onto the transport trolley. Other types of transportation are not
permitted.

Only proceed with the maintenance task as described in Chapter
"Maintenance" of the operating instructions. Any other services (e.g., technical
maintenance) or repairs must only be performed by service personnel
authorized by the instrument manufacturer.

During the operation and while performing maintenance tasks compliance
with safety instructions and accident prevention regulations is mandatory.
This regulation is, for example, DIN EN 61010 or any other comparable
national standard.

The safety measures must be checked following every technical maintenance
or repair activity. This check must be performed according to
VBG4/DIN EN 61010 or a comparable national standard.

Compliance with the maintenance schedule specified by the manufacturer
and recording all maintenance activities is mandatory. This will maintain the
operational safety of the instrument.

Never tamper with the safety devices! If it is suspected that a safety device
does not work properly, shut down the instrument immediately!

Please observe the information labels provided on the instrument.

Only genuine spare parts must be used when repairing the instrument. The
use of non-genuine spare parts will make the CE Declaration of Conformity
null and void.

The instrument must only be connected to the mains power supply with a
protective grounding conductor.

If an instrument is positioned on a sloped surface and equipped with wheels,
it may roll away during the operation. Secure the instrument while in
operation. This applies also when the instrument is being transported.

Compliance with the relevant safety regulations when using tools and
operating equipment is mandatory.

Prior to opening the instrument, disconnect the power plug. The instrument is
only completely disconnected from power if the power plug is removed.
SPECTROTEST — 05.12.2017
Safety
— 9