Chapter X Utility System - UNI-T UTD2000 Series User Manual

Chapter X
Press UTILITY to enter utility menu.
Function menu Setting
System setup See chart 10-3
Language
Pass/Fail See chart 10-4
Recorder See chart 10-5
Next
Function menu Setting
OFF
Frequency
meter
ON
Local square
wave
AUTO strategy
LAN setup
Return
Table 10-3 System setup menu (Page 3)
Function menu Setting
SELECT
Self calibration
MENU
System information
Clear information
Return
Utility System
Figure 10-1 Function Key of UTILITY
Table 10-1 Utility menu (Page 1)
Description
Enter system setup menu, the operation option include self-clibration,
system information and clear information.
Select interface language, different languages can be selected.
Enter pass/fail menu, please see "10.1 Pass/Fail"for specific operation.
Enter waveform recording menu, please see 10.2 Recorder"for specific
operation.
Go to next page.
Table 10-2 Utility menu (Page 2)
Description
Turn off frequency meter.
Turn on frequency meter.
It can be set as 10Hz, 100Hz, 1kHz, 10kHz, it defaults at 1kHz.
Enter AUTO strategy setting, the AUTO status can be set, please refer to "10.3
AUTO strategy"for specific operation.
Enter the dialog box of network setting.
Description
Execute self calibration function.
Leave self-calibration function.
Display DSO system information, including Model, Hardware Version,
Software Version, etc. Press MENU button to close system information.
Clear the stored data in DSO.
Go to previous menu.
44
UTD2000 Series User Manual