Figure 2-9 Vertical Channel Inverted Settings (Invert: ON)
2.6 Unit
Press UNIT to set the unit as "V" or "A", the default unit is V. After the unit is set, the unit
on channel status tag will change accordingly.
2.7 Mathematical operation function
Display results of CH1 & CH2 waveform mathematic operation (+、–、×、÷ ).
Table 2-3:Math Menu
Function Menu
Type
Source1
Operator
Source2
Figure 2-10 Math Operation
Setting
Description
Math
Mathematic operation (+、–、×、÷)
CH1
You can select signal source1 as CH1
CH2
You can select signal source2 as CH2
+
Source1+Source2
–
Source1–Source2
×
Source1×Source2
÷
Source1÷ Source2
CH1
You can select signal source1 as CH1
CH2
You can select signal source2 as CH2
20
UTD2000 Series User Manual