Waveform Storage And Load - UNI-T UTD2000 Series User Manual


Edit file name
When the storage medium is USB, the stored file name can be edited, press file name to
enter file name edit window, as shown in the figure below:
Move the cursor by adjusting multifunctional knob, press multifunctional knob switch
to choose number or letter, press CONFIRM to go back to previous menu.

9.2 Waveform storage and load

Press the Storage button, then press F1 to choose storege type as Reference
Waveform, and you will see the following menu.
Table 9-2 Reference waveform menu (Page 1)
Function Menu Setting
Reference
Type
waveform
REF A
Source
REF B
Close
Storage
Load
Function Menu Setting
Data source CH1/CH2
Storage medium DSO, USB
File name Customized
Store
Previous
Figure 9-2 File name window
Description
The selected storage type is reference waveform.
Select load waveform to REF A.
Select load waveform to REF B.
Close the loaded waveform.
Enter storage menu.
Enter load menu.
Table 9-3 Waveform storage menu
Description
Select storage channel.
Select the set storage location.
Please refer section 9.1 "Edit file name".
Press the button to store.
Go to the previous page.
42
UTD2000 Series User Manual