5.4.1. Side position
To set the machine in side position, do the following (Fig. 10):
In order to improve safety lower the machine as low as possible and set it in such way that axis of
❑
rotation (P) of the arm is vertical;
Unlock and remove pin (S), turn the arm by 180° and secure again with pin (S)
❑
Install safety breakaway device (D) by joining the rotary arm with the extension arm.
❑
180°
(S)
18
FISHER
HYDRAULIC FRONT-LOADER EXTENSION ARM
(P)
(D)
Fig. 10. Setting carrier in side working position
OPERATOR'S MANUAL
longitudinal opening;
–