Moving The Rake From Transport To Working Position - SaMASZ TWIST 600 Instruction Manual

When the rake is transported on the tractor's rear (Fig. 10) make sure lighting beam C
(optional equipment) is mounted.
NOTE:
When transporting rake do not exceed the speed of 25 kph. Exceeding
transport speed may cause damages to the machine.

5.3. Moving the rake from transport to working position

To move the rake to working position:
make sure there are no unauthorised persons around the danger area where the machine is to be
lowered,
open valves on the cylinders – move the lever position from B to A (Fig. 8),
lift locking pawls by pulling string E (Fig. 11).
Operator's Manual
2
Fig. 9. Rake transport position
Fig. 10. Configuration of rake to be attached at tractor's rear
Comb Side-Delivery Rake TWIST 600
1
- 13 -
C