Central Position - SaMASZ FISHER Operator's Manual

OPERATOR'S MANUAL HYDRAULIC FRONT-LOADER EXTENSION
ARM

5.4.2. Central position

To set the machine in central position, do the following (Fig. 11):
In order to improve safety lower the machine as low as possible and set it in such way that axis of
❑
rotation (P) of the arm is vertical;
Unlock and remove pin (S), and then deflect the arm;
❑
Install safety breakaway device (D) in the place shown by joining the rotary arm with the
❑
suspension frame.
(P)
(S)
(D)
Fig. 11. Setting carrier in central working position
FISHER
19