Using Special Mode; Special Mode Functions - Dascom Tally MIP480 User Manual

Your Mobile Printer has two operation modes:
•
The Normal mode is used for daily operations like paper handling and printing as ex-
plained in Chapter 2, "Paper Handling," and Chapter 3, "Printing."
•
The Special mode is used to change the printer settings.
The following table summarizes the purpose of each function.

Special Mode Functions

Function
Setup Mode
Print Configuration
Printing Test
Hex Dump Mode
Printing Alignment Adjust-
ment
Top of Form Adjustment
Setting of The First Dot Posi-
tion on The Left Side
Menu-Access
Setting Setup Mode to
Default Value (Standard)
Setting Setup Mode to
Default Value (6820)

Using Special Mode

Purpose
Change the Printer setting
Print the Printer Configuration
To check your settings by printing a list of all the printer's cur-
rently selected values.
Run the printing test
Hex-dump allows you to determine whether the computer is
sending the correct commands to the printer
Perform adjustment Bi-directional alignment
Perform adjustment of Top of Form
Change the left margin fine adjustment
Restricts access to Set-Up functions from the control panel
Resets factory settings in MACRO and INSTALL for standard
Resets factory settings in MACRO and INSTALL for 6820
4
4-1