Dascom Tally MIP480 User Manual page 48

Using Special Mode
MACRO Options
<PRINT DIR>
UNIDIR
BIDIR
SOFT CONTROL
(Software Control)
=IBM&EPSON=========
<CODE PAGE>
Code Page
=IBM DEFLTS=========
<IBM SET 1/2>
IBM SET 1
IBM SET 2
<IBM DBL HIGH>
NO
YES
<IBM AGM>
NO
YES
=EPSON DFLTS=========
<E-CHR SET>
USA
FRANCE
GERMANY
UK
DENMARK1
SWEDEN
ITALY
SPAIN1
JAPAN
NORWAY
4-14
Description
Unidirectional printing. Unidirectional printing is used for
printing that needs precise vertical alignment. Unidirec-
tional printing is slower than bi-directional printing.
Bi-directional printing. The printer prints in either direction
while seeking the next print direction for a shorter print
time. The unidirectional command is ignored.
The print direction follows a command from the computer.
If no command is sent, print direction is bi-directional.
The following are the Set-Up options for the IBM and
EPSON emulation only.
Selects the character set. Character sets can be used
according to the selected emulation.
437, 850, 860, 863, 865, 851, 852, 853, 855, 857, 866,
869, USSR GOST, 864, 437G, 920, 858, 923
The following are the Set-Up options for the IBM Proprinter
2390+ emulation only.
Specify a character set of the IBM Proprinter 2390+.
IBM character set 1
IBM character set 2
Specify whether the character height is doubled. If speci-
fied, change the vertical pitch also.
Standard character height
Double character height
Specify whether the Alternate Graphics Mode (AGM) is
used; in other words, is the printer compatible with the IBM
Graphics printers?
The base of line spacing is 1/72 inch or 1/216 inch.
The base of line spacing is 1/60 inch or 1/180 inch.
The following are the Set-Up options for the Epson-EP2
emulation only.
Select a national character set.
American English
French
German
British English
Danish 1
Swedish
Italian
Spanish 1
Japanese
Norwegian