Entering Special Mode - Dascom Tally MIP480 User Manual

Using Special Mode

Entering Special Mode

To enter Special mode:
1 Make sure that the tractors are loaded with continuous feed paper and that the paper
select lever is set backward.
2 Turn the printer off.
3 Turn the printer back on and immediatley press each keys:
Function
Setup Mode
Print Configuration
Printing Test
Hex Dump Mode
Printing Alignment Adjustment
Top Adjustment
Setting of The First Dot Position on The Left
Side
Menu-Access
Setting Setup Mode to Default Value (Stan-
dard)
Setting Setup Mode to Default Value (6820)
4-2
Load/
Park Alt
FF
•
•
•
•
• •
•
•
Ready/
Clear
•
•
• •
•
• •
•
•
•