Dascom Tally MIP480 User Manual page 14

Paper Handling
Operation
Enter Set-Up mode
Move cursor to select a
Set-Up Function or
Value
Move cursor to select a
Set-Up Option
Select a Set-Up Func-
tion or Value
Select a Set-Up Value
and move cursor to
SAVE&EXIT
Clear software-detected
errors
Initialize the printer
*1 In Normal mode operation, all keys except READY are inactive in the Busy state in which the printer is receiving or printing
data.
*2 Not printing includes the following situations: the printer is ready and awaiting data, or the READY key is pressed and the
printer is awaiting data, or the READY key is pressed during printing.
2-6
*1
Required Conditions
*2
Ready Printing
N/A N/A
Off Not printing
Off Not printing
Off Not printing
Off Not printing
— —
— —
Required Action
Fault
N/A Turn power on while pressing
SETUP/EXIT.
Off Press NEXT or PREVIOUS
key.
Off Press NEXT or PREVIOUS
key.
Off Press ALT-NEXT or ALT-
PREVIOUS key.
Off Press SETUP/EXIT.
Blinking Press SETUP/EXIT
— Turn power off and on again.