Dascom Tally MIP480 User Manual page 13

Operation
Load continuous forms
paper
Load single sheet paper
Feed paper a page
Advance perforation to
tearbar
Eject single-sheet
paper
Unload continuous-
forms paper
Pause printing
Resume printing
Resume printing after a
fault
Resume printing after
paper out
Place printer in Ready
state
Place printer in pause
state
Enter Normal mode
Enter Sleep mode
Leave Sleep mode
Printing test
Use the adjustment
temporarily
Use the adjustment
permanently
Clear the adjustment
*1
Required Conditions
*2
Ready Printing
— Not printing
— Not printing
— Not printing
— Not printing
— Not printing
— Not printing
On Printing
Blinking Not printing
Off Not printing
Off Not printing
Off Not printing
On —
N/A N/A
N/A Not printing
N/A Not printing
N/A N/A
Off —
Off —
Off —
Required Action
Fault
On Press FF/LOAD.
On Paper is automatically
detected and advanced (auto-
loading) when it is first
inserted. In this mode, if the
FF key is pushed, the inserted
sheet will be ejected from the
printer and the Fault LED will
light, indicating paper out
condition.
Off Press FF/LOAD.
Off Press READY.
Off Press FF/LOAD. The Fault
LED will light, indicating a
paper out condition.
Off Press Park.
Off Press READY
Off Press READY
On Clear error and press READY.
On Load paper.
Off Press READY
Off Press READY
N/A Turn power on without press-
ing any keys
N/A Press POWER/SLEEP for five
seconds
N/A Press POWER/SLEEP for
one second
N/A Turn power on while pressing
FF/LOAD key.
Off Press ALT-NEXT.
Off Press SETUP/EXIT.
Off Press ALT-PREVIOUS.
Paper Handling
2-5