Terminal - Eiki EK-850LU Owner's Manual

Name and function of your projector

Terminal

1
8
9
VGA IN
Connect output signal from computer to this
terminal.
USB-B IN
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
USB-A IN
When using the Memory Viewer function, insert
the USB memory directly to this terminal.
LAN
Connect network cable to this port for controlling
and operating your projector via network.
DVI-D IN
Connect DVI output signal to this terminal.
HDMI 1 / HDMI 2 IN
Connect HDMI digital output signals to this
terminal.
HDMI OUT
Transmit signals from
VGA OUT
Transmit signals from
SDI IN
Connect video output signal to this terminal
2 3 4 5
10
11
to other displays
to other displays
12 13 15
14
Kensington Security Slot
This slot is for a Kensington lock used to
deter theft of the projector.
* Kensington is a registered trademark of
ACCO Brands Corporation
HDBaseT
Connect to HDBaseT source via network cable.
AUDIO OUT
Output audio signals to amplifier or other audio
equipment.
AUDIO IN
"Line out" to "AUDIO OUT" terminal from input
audio signals. (Speakers are not equipped.)
RS232C
Connect serial cable to this terminal when using
RS232 device to control or operate your projector.
R/C IN
Connect wired remote controller to this terminal.
Connection of a wired remote controller will dis-
able the wireless remote control function
R/C OUT
Transmit wired remote controller signals of
another projector when a wired remote controller
is used.
Power cord connector
6
7
16 17
to
25