Color Adjust (Video Signals) - Eiki EK-850LU Owner's Manual

OSD setting-Color Adjust(Video signals)
Color Adjust
Menu operation
1 Press the MENU button on remote controller and the OSD displays. Press
Color Adjust icon , press
2 Press button to point to required item and press OK button to confirm your selection.
Image mode
Switch image mode to fit the image source and the
projector.
Dynamic
The light output is maximized for use in bright areas.
Standard
The picture becomes suitable for moving images in
general.
Cinema
Enriched grayscale for viewing movies.
Bla ckboard (Green)
An image mode designed for displaying on a
blackboard (Green). It boosts quality of image projected on blackboard (Green). This is designed for a
board in green rather than black as indicated by its name.
DICOM
A highly clear X-ray image is reproduced. Digital radiographs with excellent detail and clarity for medi-
cal training, presentations and conferences.
Colorboard
Image mode suitable for image projecting on surface of wall in red, blue, yellow or green.
User Image
Default image mode set by users in the Image Adjust menu.
Contrast
Press button to decrease contrast, press
Brightness
Press button to decrease brightness, press
Color
Press  to decrease the chroma and
Tint
Press  to select the appropriate tone for the image.
Red
Press button to lighten red tint and
Green
Press button to lighten green tint and
Blue
Press button to lighten blue tint and
Sharpness
Press button to soften image and
button or OK button to confirm your selection.
button to increase contrast.
button to increase brightness
to increase it.
button to darken it.
button to darken it.
button to darken it.
button to sharpen it.
Color adjust
Image mode
Contrast
Brightness
Color
Tint
Red
Green
Blue
Sharpness
button select
Standard
32
32
32
32
32
32
32
8
51