Remote Controller Operation - Eiki EK-850LU Owner's Manual

Remote controller operation

Use your remote controller for common operations.
Auto setup function (AUTO)
Press the AUTO button to auto execute the
settings set in the Auto Setup menu (including
Auto Searching and Auto PC Adjusting)
Image mode selection (IMAGE)
Press the IMAGE button to select required
image mode.
Timer (TIMER)
Press the TIMER button, a timer animation
(00:00) displays and starts timing in format of
(00:00-59:59).
Press the TIMER button again to stop timing.
Press the TIMER button again to disable the
timing function.
02 ： 02
Timer display
Blank (BLANK)
Press the BLANK button, a blank screen
displays to replace existing image. Press the
BLANK button or any other button to restore
the image.
Press the BLANK to toggle switch your screen
as shown below:
BLANK → Normal → BLANK → Normal → ......
Screen size selection (SCREEN)
Press the SCREEN button to select required
screen size.
Digital Zoom (D.ZOOM+/-)
Press the D.ZOOM+/- button to enter the Digi-
tal Zoom mode.
*Only for input as VGA and the screen size
setting as Normal or Wide.
Freeze (FREEZE)
Press the FREEZE button to freeze image on
the screen. Press the FREEZE button or any
button to disable the freeze function.
44
Basic operation
Image
Timer
HDMI2
DVI
INPUT
Auto
LENS SHIFT
FREEZE
KEYSTONE
INFO.
Freeze
Blank Image Blank
The "Blank" notification will
disappear in 4 seconds.
Blank
Screen
D.Zoom +/-