Table of Contents
Advertisement
DEPLOYMENT WIZARD
1.
Start the Adroit ventilation unit.
2.
Press the OK button.
3.
The deployment wizard is launched.
SELECTING THE LANGUAGE
Select the user interface language as follows:
1.
Use the arrow buttons to select the language.
2.
Select OK.
3.
The language has now been set, and the control panel will
move on to the time settings.
SET THE TIME
When the deployment wizard prompts you to set the date and time,
the Time and date screen is opened first:
1.
Use the Plus and Minus buttons to set the hours.
Press the Right arrow button.
2.
3.
Use the Plus and Minus buttons to set the minutes.
4.
The time is now set.
5.
Proceed to the next phase by pressing the Right arrow
button.
SET THE 24- OR 12-HOUR CLOCK
By default, the system uses the 24 hour clock.
If you want to use the 24 hour clock, proceed to the next step by
pressing the Arrow right button.
If you want to use the 12 hour clock, proceed as follows:
Press the Minus button. The 24 Hour Time setting value is
1.
changed to Off.
2.
Proceed to the next phase by pressing the Right arrow
button.
(Integral CO
9
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
Sensor)
2
Advertisement
Table of Contents
