Table of Contents
Advertisement
DV50 DV80
(Integral CO
Sensor)
2
MODIFYING THE BOOST PROFILE SETTINGS
When you want to edit the Boost profile settings, proceed as
follows:
1.
Open Boost profile main view.
2.
Press the Profile information button.
3.
Press the Edit button.
4.
The fan speed setup opens.
5.
Set the Boost profile fan speed as a percentage of the
maximum by using the Plus and Minus buttons.
6.
Press the Right arrow button.
7.
The temperature setup screen is opened.
8.
Set the desired supply air temperature for the Boost profile
by using the Plus and Minus buttons. The recommended
temperature is +15°C or 2—3°C below the room temperature.
You can adjust the temperature in the range of +10°C – +5°C.
9.
Press the Right arrow button.
10. The setup screen for the automatic fan speed control, based
on the relative humidity, appears.
11. Use the Plus and Minus buttons to select whether the
automatic fan speed control, based on the relative humidity, is
used or not.
12. Press the Right arrow button.
13. The setup for automatic fan speed control based on the
carbon dioxide or VOC level opens.
14. Use the Plus and Minus buttons to select whether the
automatic fan speed control, based on the carbon dioxide or
VOC level, is used or not.
15. Press the Right arrow button.
16. The profile timer setting screen is opened.
17. Use the Plus and Minus buttons to select whether the profile
timer function is used or not. The options are:
• On — When the timer is on, the Boost profile is used only
for the period specified in the timer.
• Off — When the timer is off, the Boost profile is used until
manually changed (or the Week clock) change the profile.
18. Press the Right arrow button.
19. The profile timer duration setting screen is opened.
20. Set the profile timer duration by using the Plus and Minus
buttons.
21. Press the OK button.
VENTILATION PROFILES
24
Advertisement
Table of Contents
