Table of Contents
Advertisement
DV50 DV80
(Integral CO
Sensor)
2
TIME AND DATE
SETTING THE TIME AND DATE
In the following chapters, it shows you how to set:
•
Time
•
24- or 12-hour clock
•
Automatic daylight-saving time
•
Date
NOTE
The system time will stay active for a few hours if the power is cut
to the unit.
SETTING THE TIME
To set the time, proceed as follows:
Select Settings > Time and date.
1.
2.
Press the OK button.
3.
The Time and date settings are opened.
4.
Use the Plus and Minus buttons to set the hours.
5.
Press the Right arrow button.
6.
Use the Plus and Minus buttons to set the minutes.
7.
Press the OK button.
SELECTING THE 24- OR 12-HOUR CLOCK
By default, the system uses a 24 hour clock. If you want to use the
12 hour clock, proceed as follows:
Select Settings > Time and date.
1.
2.
Press the OK button.
3.
The Time and date settings are opened.
4.
Press the Right arrow until the display 2/4 opens.
5.
Press the Minus button. The 24-Hour Time setting value is
changed to Off.
6.
Press the OK button.
SETTING THE AUTOMATIC DAYLIGHT SAVING
TIME
If you want the system to automatically switch over to daylight
saving time, proceed as follows:
1.
Select Settings > Time and date.
2.
Press the OK button.
The Time and date settings open.
3.
4.
Press the Right arrow until the display 3/4 opens.
5.
Press the Plus button. The Dayl.Saving Time setting value is
changed to On.
6.
Press the OK button.
32
SETTINGS
Advertisement
Table of Contents
