Table of Contents
Advertisement
DV50 DV80
(Integral CO
Sensor)
2
AWAY PROFILE
When you want to set the Away profile settings, proceed as
follows:
1. The deployment wizard Away profile screen is opened.
NOTE
Once you have set the fan speed for the At home profile, the fan
speed for the Away profile will default to -30% of the At home
profile fan speed. We recommend this basic amount of ventilation
for the Away profile setting. If necessary, you can change it.
2. Set the Away profile fan speed as a percentage of the
maximum by using the Plus and Minus buttons.
3. The Away profile fan speed value is now set.
4. Press the Right arrow button.
5. The temperature setup screen is opened.
6. Set the desired supply air temperature for the Away profile
by using the Plus and Minus buttons. You can adjust the
temperature in the range of +10°C – +5°C.
7. The Away profile supply air temperature is now set.
8. Press the Right arrow button.
9. The setup screen for automatic fan speed control, based on the
relative humidity, appears.
10. Use the Plus and Minus buttons to select whether the
automatic fan speed control, based on the relative humidity, is
used or not.
11. The automatic fan speed control, based on the relative
humidity, is now set.
12. Press the Right arrow button.
13. The setup screen for the automatic fan speed control, based on
the carbon dioxide or VOC content, appears.
14. Use the Plus and Minus buttons to select whether the
automatic fan speed control, based on the carbon dioxide or
VOC content, is used or not.
15. The automatic fan speed control, based on the carbon dioxide
or VOC content, is now set.
16. Press the OK button.
14
EXPERT SETTINGS
Advertisement
Table of Contents
