VENTILATION PROFILES
FINISHING UP
When you have completed the wizard, the Setup done! screen will
open.
Finish up the deployment, as follows:
1.
If you want to go back to repair or change a value, use the
arrow buttons to select the desired line and press the OK
button.
2.
Repeat the selected setup phase or phases, until you are
satisfied with the settings.
3.
When you are satisfied with the settings, use the arrow
buttons to select Start and press the OK button.
(Integral CO
17
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
Sensor)
2