Table of Contents
Advertisement
VENTILATION PROFILES
MODIFYING THE FIREPLACE PROFILE
SETTINGS
When you want to edit the Fireplace function settings, proceed as
follows:
1.
Open the Fireplace function main view.
2.
Press the Profile information button.
3.
Press the Edit button.
4.
The fan speed setup screen is opened.
5.
Use the Plus and Minus buttons to set the Fireplace
function duration in minutes. This value determines how long
the profile is enabled when you switch it on.
6.
Press the Right arrow button.
7.
The screen for setting the profile supply air fan speed appears.
8.
Set the Fireplace function supply air fan speed as a
percentage of the maximum by using the Plus and Minus
buttons.
TIP
In the fireplace mode, we recommend that you increase the
supply air fan speed, in order to obtain a positive pressure at
the ventilation zone. We do not recommend reducing the extract
air fan speed. Doing this will help against the back flushing of
contaminants into the property
9.
Press the Right arrow button.
10. The screen for setting the profile extract air fan speed will
appear.
11. Set the Fireplace function extract air fan speed as a
percentage of the maximum by using the Plus and Minus
buttons.
12. Press the Right arrow button.
13. The profile timer setting screen is displayed.
14. Use the Plus and Minus buttons to select whether the profile
timer function is enabled or not. The options are:
•
On — When the timer is enabled, the Fireplace function
is only on for the period defined in the timer.
•
Off — When the timer is disabled, the Fireplace function
is used until manually changed (or the week clock) change
the profile.
15. Press the OK button.
(Integral CO
25
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
Sensor)
2
Advertisement
Table of Contents
