Table of Contents
Advertisement
DV50 DV80
(Integral CO
Sensor)
2
WEEK CLOCK
SETTING AND EDITING THE WEEKLY
PROGRAM
If you want to set the weekly timer program or edit an existing
program, proceed as follows:
1.
Select Settings > Week clock.
2.
Press the OK button.
3.
The week view in the week clock is displayed.
Use the Right arrow button to select the desired day.
4.
5.
Use the Down arrow button to select the desired time.
6.
Use the Select button to browse and select the ventilation
profile that will be turned on at the chosen time. Use the
Select button to browse the profile icons. The icons are:
• This icon selects the At home profile.
• This icon selects the Away profile.
• This icon selects the Boost profile.
7.
Set the other profile changes for the Week clock as described
above.
8.
Press the Settings button.
9.
The Week clock menu opens.
10. Select Save and Quit.
11. To exit without saving the weekly program or changes, select
Cancel and Quit.
12. A confirmation display opens.
13. Press the OK button.
DISABLING THE WEEK CLOCK OFF
If you want to disable the week clock, proceed as follows:
1.
Select Settings > Week clock.
2.
Press the OK button.
3.
Press the Settings button.
4.
The Week clock menu opens.
5.
Select Turn Off.
6.
Press the Select button.
7.
A confirmation screen is opened.
8.
The week clock is now disabled. If you have set a weekly
program, it will be saved in the system.
34
SETTINGS
Advertisement
Table of Contents
