Table of Contents
Advertisement
SETTINGS
TIME AND DATE
SETTING THE DATE
To set the date, proceed as follows:
1.
Select Settings > Time and date.
2.
Press the OK button.
3.
The Time and date settings are opened.
4.
Press the Right arrow until the display 4/4 appears.
5.
Use the Plus and Minus buttons to set the date.
6.
Press the Right arrow button.
7.
Use the Plus and Minus buttons to set the month.
8.
Press the Right arrow button.
9.
Use the Plus and Minus buttons to set the year.
10. Press the OK button.
WEEK CLOCK
The week clock allows you to program a weekly program for the
ventilation unit. The program controls the unit by changing the
ventilation profile. You can set one of the following conditions for
each hour of the week:
•
At Home — Use the At home profile.
•
Away — Use the Away profile.
•
Boost — Use the Boost profile.
•
Blank — Do not change the profile.
NOTE
If you change the profile manually when the Week clock is on, the
selected profile will be active until the Week clock switches to the
next profile in the program.
If the humidity or carbon dioxide sensors control the ventilation,
they will adjust the fan speed, regardless of whether the profile has
been manually selected or selected by the Week clock.
ENABLING THE WEEK CLOCK ON
To turn the Week clock on, proceed as follows:
1.
Select Settings > Week clock.
2.
Press the OK button.
3.
The week view in the week clock is displayed.
4.
Press the Settings button.
5.
The Week clock menu appears.
6.
Select Turn on.
7.
Press the Select button.
8.
A confirmation screen is opened.
TIP
You can switch the week clock ON or OFF by pressing the OK
button in the Week clock screen for a few seconds.
(Integral CO
33
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
Sensor)
2
Advertisement
Table of Contents
