Table of Contents
Advertisement
EXPERT SETTINGS
BOOST PROFILE
When you want to set the Boost profile settings, proceed as
follows:
1. The deployment wizard Boost profile screen is opened.
NOTE
Once you have set the fan speed for the At home profile, the fan
speed for the Boost profile will default to +30% of the At home
profile fan speed. We recommend this basic amount of ventilation
for the Boost profile setting. If necessary, you can change it.
2. Set the Boost profile fan speed as a percentage of the
maximum by using the Plus and Minus buttons.
3. Press the Right arrow button.
4. The temperature setup screen is opened.
5. Set the desired supply air temperature for the Boost profile
by using the Plus and Minus buttons. You can adjust the
temperature in the range of +10°C – +5°C.
6. Press the Right arrow button.
7. The setup screen for the automatic fan speed control, based on
the relative humidity, appears.
8. Use the Plus and Minus buttons to select whether the
automatic fan speed control, based on the relative humidity, is
used or not.
9. Press the Right arrow button.
10. The setup screen for the automatic fan speed control, based on
the carbon dioxide or VOC content, appears.
11. Use the Plus and Minus buttons to select whether the
automatic fan speed control, based on the carbon dioxide or
VOC content, is used or not.
12. Press the Right arrow button.
13. The profile timer setting screen is displayed.
14. Use the Plus and Minus buttons to select whether the profile
timer function is enabled or not. The options are:
• On — When the timer is enabled, the Boost profile is
only on for the period defined in the timer.
• Off — When the timer is disabled, the Boost profile is
used until you (or the week clock) change the profile.
15. Press the Right arrow button.
16. The timer duration setting screen appears.
17. Set the profile timer duration in minutes by using the Plus and
Minus buttons.
18. Press the OK button.
(Integral CO
15
© Airflow • We reserve the right to make changes without prior notice
DV50 DV80
Sensor)
2
Advertisement
Table of Contents
