Troubleshooting
In This Chapter
Problems Installing and Starting Storage Manager Pro
Resolving Problems Shown by the Status Indicators
Using the Diagnose Button
Managing Controllers on Remote Systems
Use the information in the following sections when you have
problems using Storage Manager Pro. Check this information
before calling for technical support.
Problems Installing and Starting Storage
Manager Pro
Problem
While installing Storage
Manager Pro, you receive an
error that says that the
temporary space required to
perform this installation is
greater than what is available.
You start the Storage Manager
Pro user interface and receive
a "cannot connect to local
server" error message.
Solution
You must have 20 MB of free space for
temp files. The installation uses your
operating system's temporary free
space. Be sure you have that much
free space and then restart the
installation.
Check that the Storage Manager Pro
service is running. If it is not, start it
manually. See Starting Adaptec Storage
Manager Pro on page 1-3.
11
11-1
11-2
11-2
11-4
11-1