Adaptec Storage Manager Pro for DuraStor User's Guide
To add a system to an existing management set:
1 From the Dashboard, click Remote Configuration.
Note: This button is only available if you are logged in
under an account with Administration privileges.
The Remote Configuration dialog box appears.
2 Select the Configuration Task based on the system you are
working from.
From this system
System you want to add to a
management set
Directory manager
Member of a management set,
but not the directory manager
3 Type the system name or IP address based on the system you are
working from.
From this system
System you want to add to a
management set
Directory manager
Member of a management set,
but not the directory manager
4 Click OK.
4-8
Select
Register This System
Add a System to This Set
Add a System to This Set
Type system name or IP address of
Directory manager
System you want to add
System you want to add