Adaptec DuraStor 7220SS User Manual page 59

Adaptec Storage Manager Pro for DuraStor User's Guide
Member of the management set, but not the system you want to
I
remove from the same set
To remove a system from a management set:
1 From the Storage Manager Pro Dashboard, click Remote
Configuration.
The Remote Configuration dialog box appears.
2 Select the Configuration Task based on the system you are
working from.
From this system
Directory manager
Member you want to remove
from the management set
Member of the management set,
but not the system you want to
remove from the same set
3 From the drop-down list box, select the System Name or IP
Address based on the status of the system you are working
from.
From this system
Directory manager
Member you want to remove
from the management set
Member of a management set,
but not the system you want to
remove from the same set
4 Click OK.
Storage Manager Pro confirms that you want to remove a
system from the management set.
5 Click Yes.
If the old directory manager is not available, Storage Manager
Pro displays a message letting you know that it could not
unregister you from the old management set. You should check
4-12
Select
Remove a System from This Set
Remove This System from the
Set
Remove a System from This Set
Type
System name or IP address of the
system you want to remove from
the set
Nothing
System name or IP address of the
system you want to remove from
the set