Adding A System To An Existing Management Set - Adaptec DuraStor 7220SS User Manual

7 Type an Account Name and Password for the directory manager
computer. The password is case sensitive.
Note: The account you use must have Administration
privileges.
8 Click Login.
Storage Manager Pro confirms that the system was successfully
registered.
9 Click OK.
The Storage Manager Pro Dashboard appears displaying all the
systems that are part of the management set.
Once you register one or more systems with the directory
manager, you can use Storage Manager Pro to manage remote
controllers.
Adding a System to an Existing Management
Set
You can add a system to an existing management set from any of
three systems on your network:
System you want to add to a management set
I
Directory manager for the management set
I
Member of a management set, but not the directory manager
I
The system you are adding must be a stand-alone system—that is,
it must not already be a member of a management set.
Storage Manager Pro will ask for authentication when you try to
add another system to the management set. If you are on a system
that is a member of a management set and want to add a stand-
alone system to that management set, you must type a user name
and password for an account on the stand-alone system that has
Administration privileges. If you are on a stand-alone system and
wish to add it to a management set, you must type a user name and
password for an account that resides on the directory manager of
that management set and has Administration privileges.
Managing Controllers on Remote Systems
4-7