Understanding Remote Access - Adaptec DuraStor 7220SS User Manual

Adaptec Storage Manager Pro for DuraStor User's Guide

Understanding Remote Access

You set up access to remote systems by designating one system as
the directory manager for Storage Manager Pro. You do this by
registering each system with the directory manager. The directory
manager is the system that other systems register with and that
stores all user accounts for the management set.
Using the diagram below as an example, to set up remote access
you would start Storage Manager Pro on systems A, B, and C, and
register them with the directory manager (System D). You register
with the directory manager by entering the directory manager's
system name or IP address in Storage Manager Pro.
All the systems that register with a specific directory manager plus
the directory manager itself are collectively called a management set.
You can set up multiple management sets. Each management set
can have only one directory manager and each system can be a
member of only one management set.
When you start Storage Manager Pro on any of the systems in this
example management set, you will have access to all four systems
from the Storage Manager Pro Dashboard. You can then select the
system you want and click Open System.
4-2