Resetting The Battery Age - Adaptec DuraStor 7220SS User Manual

3 Click the Battery tab.
4 Click the Enable Battery Alarm check box.
A check mark in the box shows that the battery alarm is enabled.
If the box is empty, the battery alarm is disabled.
5 Click OK.
You must reboot the controller for the change to take effect.

Resetting the Battery Age

Your controller monitors the life of your battery and creates an
event when the battery nears the end of its life. Controller batteries
typically last about three years. The event reminding you to replace
the battery occurs after approximately 35 months of use. The event
appears each time you reboot the controller until you replace the
battery and reset the battery age.
When you replace the battery, you must reset the battery age for
the battery life monitor to work properly.
You can also change the battery age at any time. You might want to
use this option if you install a battery from another controller and
want to reset the battery reminder to display at the right time.
To reset the battery age:
1 In the System Browser window, select the controller whose
battery you want to enable or disable.
Managing Controllers
9-7