Adaptec DuraStor 7220SS User Manual page 29

Adaptec Storage Manager Pro for DuraStor User's Guide
3 Follow the on-screen instructions.
Click Next to go to the next configuration criterion or click
Finish at any time to create the array. The Create Array Wizard
will determine the type of array to create based on the available
disk drives on your controller and any criteria you have
specified.
4 Click Finish when you are ready to create the array.
The Verify Array Creation Configuration dialog box appears.
5 Type the Array Name.
This is the name Storage Manager Pro will use to display the
array in the System Browser window. The name can be up to 20
characters in length.
If you leave Array Name field blank, the array will have no
name.
6 Review the settings in the Verify Array Creation Configuration
dialog box to be sure the array is configured the way you want
it.
Click Back if you want to change any of the array configuration
settings before creating the array.
7 Click Finish to create the array as described.
The system creates the array using your selections and adds the
array to the System Browser window. You can begin using the
array while Storage Manager Pro completes the Build process.
The Build task may take several hours to complete, depending
on the array type, size of the array, and I/O load.
Before you can write data to the array, you need to make the array
available for use. See Making the Array Available for Use on
page 2-12.
To add a spare disk drive, see Adding a Disk Drive to the Spare Pool
on page 7-5, or Adding a Spare to an Array on page 7-2.
2-4