Adaptec DuraStor 7220SS User Manual page 79

To change the notification properties for an existing recipient:
1 From the Dashboard, click Event Notification.
The Event Notification dialog box appears.
2 From the list of recipients, select the name of the person whose
properties you want to change.
3 Click Properties.
The Recipient Properties dialog box appears. You can make
changes to all of the fields in the Recipient Properties dialog box
except the Recipient Name. If you want to change the name, first
delete the recipient and then add a new notification recipient
using the new name.
4 Select the type of notification you want the recipient to receive
(you can select one or both types):
– E-mail—The recipient will receive an e-mail when the
specified events occur.
– E-mail Pager—The recipient will receive an e-mail page when
the specified events occur.
5 For each notification type assigned to the recipient, type the
recipient's e-mail address.
You may want to send a test e-mail notification to confirm that
the address is correct. See Sending a Test E-mail Notification on
page 6-12.
6 From the drop-down list box, select the Minimum Event
Severity that will generate an e-mail or e-mail pager message to
the recipient.
You can assign different minimum event severities for each
notification type (e-mail and/or e-mail pager):
– Informational—The recipient will receive notification about
all Informational, Warning, and Critical events. Informational
events indicate changes to the system that do not affect
performance such as when an array has been created or when
a system goes online.
– Warning—The recipient will receive notification about all
Warning and Critical events. Warning events indicate changes
that may adversely impact the system, such as when an
Monitoring System Status
6-11