Table of Contents
Advertisement
S
R
C
AVE AND
ESTORE
ONFIGURATION
Available to Administrator only, this page provides a way for you to save the unit's configuration to an
XML file. The advantage to this is if for whatever reason you need to reload the SERIES 90B
configuration at a later date, you'll have the configuration file saved already. Simply browse to the file
on your PC and restore the configuration file to the unit.
Note: it is strongly advised to have a copy of each SERIES 90B configuration file saved at all times.
After you make changes, save a new copy by clicking on the Save Configuration button.
To restore a configuration (refer to Figure E-13):
Click the Browse button.
From the choose file dialog, select the configuration file to be downloaded to SERIES 90B.
Click Open and a message box will pop up asking you to confirm your action. Click Ok.
Your SERIES 90B unit will be re-configured with the saved file, including all Alarm Inputs and
Outputs.
Figure E-15 Save and Restore Configuration Page
134
Advertisement
Table of Contents
