Table of Contents
Advertisement
The configuration application will always use the baud rate defined for the
SERIES 90B. If the baud rate is changed it will not take effect until the current
configuration session is complete.
Port Control
The ASCII port may be selected from:
RS-232
RS-485
In addition the RS-485 termination may be enabled
The configuration application will always use the baud rate defined for the
SERIES 90B. If the baud rate is changed it will not take effect until the current
configuration session is complete.
Series 90B ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
i.
81
Advertisement
Table of Contents
