Table of Contents
Advertisement
Repeat Relay Outputs
Repeat Relay Option RR
Individual relay per point
Follows field contact or alarm sequence, selectable in Software
Energized or de-energized Relay Coil, selectable in Software
Form A or Form B (N.O. or N.C.) Contact, selectable by Jumper
-Available with all window sizes
Repeat Relay Option 2RR
Two repeat relays per point
Follows field contact or alarm sequence, selectable in Software
Energized or de-energized Relay Coil, selectable in Software
Form A or Form B (N.O. or N.C.) Contact, selectable by Jumper
-Available with full or half size (option 2S) windows
Repeat Relay Option FRC
Individual repeat relay per point
Follows field contact or alarm sequence, selectable in Software
Energized or de-energized Relay Coil, selectable in Software
Form C (SPDT) Contact, selectable by Jumper
-Available with full or half size (option 2S) windows
Relay Operation
Follows Field Contact:
Follows Alarm Sequence: Repeat Relay Output Latches on Alarm until
Follows Alarm Display:
Relay operation selectable in Software per point
Relay Ratings:
24VDC @ 3.0 Amps
110VDC @ 0.1 Amps
120VAC @ 3.0 Amps
Resistive Load
92
Repeat Relay Output Follows Input Contact State
Acknowledged or Reset
Repeat Relay Output toggles on and off following
operation of window
Series 90B ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
Advertisement
Table of Contents
