Table of Contents
Advertisement
implies that some other serial device is providing the status of the alarm and the
Annunciator will respond as if it were a field contact input. You may choose
combinations of transmit and receive, but a single input cannot do both. You
may also set up an input as receive while providing a hard-wired contact input to
the same point. In this case, the Annunciator will respond to alarms from either
the contact or serial input in a logic OR arrangement. If the option is not available
this button is not displayed. It may also not be displayed if creating a new
configuration. You must connect to your Annunciator to enable the serial
Modbus configuration.
Note: Systems with Serial Inputs only (not Hardwired) cannot be set to
'transmit'.
Panel Colors
The color of each input in the mimic diagram may be changed to match the
actual annunciator. To do this select all the inputs with the same color as
described above then click on 'Panel Colors'. From the color selector dialog
choose any color. The custom colors represent the available window colors.
Repeat this for each color.
Table View
Click on the Table View button to display the current input configuration in a table
format. This is designed to be a summary of all the input configuration, but by
clicking on the individual items you can change the selection from the table.
The column widths may be adjusted by clicking and dragging on the vertical
separators between the column titles.
72
Series 90B
Advertisement
Table of Contents
