High-Speed Counter Match Flag Attribute: R - Fuji Electric MICREX-SX Series User Manual

Section 2 Specifications
(5) High-speed counter match flag Attribute: R
Address
Expert Standard
%MX1.61489.0 M614890
%MX1.61489.1 M614891
%MX1.61489.2 M614892
%MX1.61489.3 M614893
%MX1.61489.4 M614894
%MX1.61489.5 M614895
%MX1.61489.6 M614896
%MX1.61489.7 M614897
Name
Match flag CH0
Match flag CH1
Match flag CH2
Match flag CH3
Match flag CH4
Match flag CH5
Match flag CH6
Match flag CH7
Description
This flag can be used only for an event address of "Event task".
The event task is executed if this flag is assigned to an event
address & when the high speed counter current value reaches
(matched) to the setting value.
When the event task is executed, this flag automatically cleared by
the system immediately. Therefore, if this flag is accessed by a user
application, this flag is read as "OFF".
Since this flag cannot be used in an application program, set to ON
any variable (device memory) in a POU assigned to the Event task
as alternative.
2-6