NSE–5
Disassembly Instructions
17. Position the right hand Plunger onto
the start of the track and on the
Microphone Connector, as shown
18. Position the left hand Plungers onto the start of the track
and push the Slide Assembly into the phone.
! Push the Slide Assembly straight into the phone to
avoid bending of the Plungers !
Page 8
16. ! Assemble the whole phone before fitting
the Slide Assembly !
The remaining assembly is done in the reverse
order of the disassembly.
Note Torque for screws 0.2Nm
PAMS
Technical Documentation
Issue 1 07/99