Module Jig Mjs-8 - Nokia Mobile Phones NSE-5 Series Service Manual

PAMS
Technical Documentation
Module Jig MJS–8
The Module Jig MJS–8 is used for component level repair of the
system/RF module. *
Product Code
Module Jig MJS–8:
View of MJS–8
*) Connect the External antenna cable XRC–1B, service Cable SCH–5,
and the DC Cable PCS–1 to the MJS–8 jig.
The service cable SCH–5 can be replaced by the DAU–9P cable.
Note: The nominal supply voltage for MJS–8 is +4.1 V.
The supply voltage must not exceed +6.0 V.
Issue 1 07/99
0775170
NSE–5
Service Tools
Page 5