Nokia Mobile Phones NSE-5 Series Service Manual page 161

PAMS
Technical Documentation
E MCU Download DSP................
F DSP Alive.......................
G COBBA Serial.......................
H COBBA Parallel.....................
I EEPROM Sec Checksum................
J PPM Validity..................................
K Warranty State..............................
ADC Readings... command
Activation
Alt, E,A
Command is used to read and show A/D values from phone.
Command opens ADC Readings dialog.
Dialog mode: modal
ADC Readings dialog has static text field where measurements are
updated to window every one second.
ADC Readings dialog has following items:
Close (ENTER) button:
Closes the ADC Readings dialog. Does not send anything to phone.
Help button: (ALT+H)
Context sensitive help
Issue 1 07/99
Status Bar Text
ADC Readings; Set test on...
ADC Readings; Reading from ME....
.
Service Software Instructions
Page 61
NSE–5