Nokia Mobile Phones NSE-5 Series Service Manual page 159

PAMS
Technical Documentation
When the selection is made, the test result is read from ME. The test re-
sult will be shown to the user within MCU Self–test dialog.
Dialog mode: modal
MCU Self–test dialog has following items:
Tests list box (ALT+T):
The field "(p)" in the screen example means that the test is also run in
power up. The field "(/s)" means that this test is selectable one.
Test states are updated according to results received from the phone.
Possible test states will be one of the next:
Passed
Failed
No response
Not executed
Not valid
RUNNING....
Note that power–off test have no values, because if test has been passed, power has
been turned off. If power–off test fails a special error message window is shown. If no
response is received to power off test message in a few seconds, the user is informed by
Issue 1 07/99
Service Software Instructions
Page 59
NSE–5