Local Mode; Tuning; Energy Management Calibration; Testing - Nokia Mobile Phones NSE-5 Series Service Manual

PAMS
Technical Documentation
The After Sales SW sets automatically the MS state to local mode when
needed. If phone identification view is open, window will be automatically
updated. Also if RF Information Window is open it will be updated to quick
info view.
When the user selects any of the following items, the MS–state is
automatically set to normal:

Testing

Dealer

Local Mode

Activation
Alt, P, L
Shift+F5
Selection will change the MS–state to local. When the user selects any of
the following items the MS–state is automatically set to local:

Tuning

Tuning
Tuning
Tuning
Testing
Testing
Testing
Testing
Testing
Testing
Testing
Software
Dealer
Dealer
Dealer
The After Sales SW sets automatically the MS state to local mode when
needed.
Also if quick info view is open it will be updated to RF Information view.
Issue 1 07/99
Vibrator
Set UI/DEV Default Values
Status Bar Text
Initialising local mode....;
RX Calibration
Tx Power
Tx I/Q

Energy Management Calibration

RF Controls

RSSI Reading

Self Tests

Audio Internal
Vibrator
Call Simulation
Noise Sensitivity
Warranty State
User Settings
Short Code Memory
Restore User Defaults
Service Software Instructions
Page 31
NSE–5