Nokia Mobile Phones NSE-5 Series Service Manual page 184

NSE–5
Service Software Instructions
SCM & User Settings... command
Activation
Alt, D, M
This command is used to get SCM and user settings from phone to file
and vice versa. Following information is loaded/saved with this dialog: all
user settings, graphical/text wake up message, SCM, alarms, calendar
items and CLI logos and groups
When data is written or read phone waiting dialog is showed to user.
Dialog mode: modal
SCM & User Settings dialog box has following items:
File Name edit box (ALT+F):
User can edit file name or select file with the Select File button. When
dialog is opened, it contains name of the previously saved or loaded file.
Write Phone button (ALT+W):
Loads settings from file and writes them to phone.
Page 84
Status Bar Text
SCM & User Settings; Reading data from ME...
SCM & User Settings; Writing data to ME...
PAMS
Technical Documentation
Issue 1 07/99