Nokia Mobile Phones NSE-5 Series Service Manual page 179

PAMS
Technical Documentation
MCU Image File group:
Here the selected MCU SW image file is displayed. The... button allows
the user to change the file.
PPM File group:
Here the selected PPM file is displayed. The... button allows the user to
change the file.
PPM Version in File edit box (read only):
Display the selected PPM file version.
PPM Package Versions list box (read only):
Display the version information the elements included in the PPM file.
Erasure Options group (read only):
Display the erase settings used before programming the flash with the
selected files.
Erase Defined Area check box (read only):
When this checkbox is checked the flash area given by Low limit and
High limit will be erased before new files are programmed in the flash.
Low limit edit box (read only):
Displays the lower boundary for the flash area to be erased.
High limit edit box (read only):
Displays the high boundary for the flash area to be erased.
Promming options group:
Enables the user to select the current flash programming mode.
Flash whole flash check box (ALT+A):
Enables the user to select whether a complete reprogramming of the
flash is to be performed or not. If a complete reprogramming is chosen,
all user data, phone alignment, IMEI code and UI settings will be lost.
Before a complete reprogramming the flash is erased including the EE-
PROM. When this checkbox is unchecked only the old MCU SW image
file and PPM file is erased before the flash programming commences.
Issue 1 07/99
Service Software Instructions
Page 79
NSE–5