NSE–5
Service Software Instructions
NSE–5 Features
Product
New command
Activation
Alt, P, N
Ctrl+R
If phone is changed (with same phone type only serial number is
changed) phone will be initialised to normal mode. If phone is changed to
different phone type the current DLLs are unloaded and new ones are
loaded for that phone.
If the Quick/RF Info view is open, window will be automatically updated. If
Phone Information view is open, it will be automatically updated.
Open... command
Activation
Alt, P, O
Phone is set to normal mode.
Initialise... command
Activation
Alt, P, I
Opens a submenu
Normal Mode
Activation
Alt, P, N
F5
When normal mode has been activated or program has been started,
self–test results will be asked from MCU. If any fault was found in the
tests, an error message is shown. If normal mode has been set
successfully (no self test error has been found), and paging listening has
been started, the used AFC value is requested from MS. Initialisation
routine checks phone's cellular type and if unsupported phone is detected,
application unloads the DLLs.
Page 30
Status Bar Text
Scanning for product...
Status Bar Text
Changing product support modules
Status Bar Text
Status Bar Text
Initialising normal mode..,
PAMS
Technical Documentation
Issue 1 07/99