Nokia Mobile Phones NSE-5 Series Service Manual page 224

NSE–5
Disassembly Instructions
12. Bend open one side of
the (plastic) Slide Cover
and take out the Metal
Slide
! DO NOT !
Hold the Metal Slide like this.
The Metal Slide is bent very eas-
ily when it is not protected by the
phone. Avoid bending of the
Plungers at all times.
Fitting a Metal Slide onto a Slide Cover:
Push the Metal Slide onto
the snap on one side of
the Slide Cover.
Page 6
ALWAYS
Handle the Metal Slide like this.
The Metal Slide can be held by the Targa Bow or by one of
the Plungers.
Push down the other
side, but do not hit the
middle snap.
PAMS
Technical Documentation
Push the Metal Slide onto
the snap on the opposite
side. A click should be
noticed.
Issue 1 07/99