Clear Data - GE Multilin 489 Instruction Manual

5.2.7

Clear Data

CLEAR DATA
5–16
Courtesy of NationalSwitchgear.com
TEXT 4
MESSAGE
GE MULTILIN
MESSAGE
489 GENERATOR RELAY
Up to 5 message screens can be programmed under the message scratchpad area. These
messages may be notes that pertain to the installation of the generator. In addition, these
notes may be selected for scanning during default message display. This might be useful
for reminding operators to perform certain tasks. The messages may be entered from the
communications ports or through the keypad. To enter a 40 character message:
Select the user message to be changed.
Press the decimal [.] key to enter text mode.
An underscore cursor will appear under the first character.
Use the
A space is selected like a character.
Press the [.] key to advance to the next character.
To skip over a character press the [.] key.
If an incorrect character is accidentally stored, press the [.] key enough
times to scroll the cursor around to the character.
When the desired message is displayed press the
the
ESCAPE
The message is now permanently stored.
Press
ESCAPE
PATH: SETPOINTS S1 489 SETUP
[ ] CLEAR LAST TRIP
DATA: No
RESET MWh and Mvarh
MESSAGE
METERS: No
CLEAR PEAK DEMAND
MESSAGE
DATA: No
CLEAR RTD
MESSAGE
MAXIMUMS: No
CLEAR ANALOG I/P
MESSAGE
MIN/MAX: No
CLEAR TRIP
MESSAGE
COUNTERS: No
CLEAR EVENT
MESSAGE
RECORD: No
CLEAR GENERATOR
MESSAGE
INFORMATION: No
Range: 40 alphanumeric characters
Range: 40 alphanumeric characters
keys to display the desired character.
VALUE
key to abort.
to cancel the altered message.
CLEAR DATA
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 5: SETPOINTS
key to store or
ENTER